Quantum Supply Limited
Visit U.S. Website
  • Home
  • Login / Register
  • About Us
    • About Us
    • Locations
    • Careers
  • Products
    • Browse by Category
    • Browse by Brand
  • Valve Services
  • Service & Support
  • Resources
    • Metal Trace
    • Reference Guides
    • Catalogs and Brochures
866-723-4279
  • Contact Us
    • Locations
    • Contact Form
Back to top

VALVES

  • API 6D Top Entry Trunnion Mounted Ball Valve

    Diver, ROV or Actuated on Request ADDED
    READ MORE

    API 6D Trunnion Mounted Ball Valve

    Top Entry – Forged Body,  Models PSL3 – PSL4 and Cast Body, Model PSL2

    Subsea top entry ball valves are designed according to API6DSS, API6A, API17D with the addition of customer requirements when present. The valves do not rely on lubricant or grease to assist sealing between the ball and seat. Metal-to-metal sealing is used between the ball and seat and non-elastomeric seal are provided between the seat and body. Metal-to-metal sealing is also provided between body-to-bonnet and stem-to-body (optional).The Subsea ball valves are actuated by Perar hydraulic actuator or gearbox as requested.

  • API 6D Trunnion Mounted Ball Valve with 3 Piece Bolted Body

    Perar_EB EC Series_Bolted Body Trunnion Mounted Ball Valve ADDED
    READ MORE

    API 6D Trunnion Mounted Ball Valve

    3 Piece Bolted Body, Side Entry – Models EB & EC

    Standard Model (EB): The ball of trunnion mounted configuration is supported by bearing plates hold by the end adaptors. In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear.

    Perar Trunnion Mounted Bolted Body Side‐Entry Ball Valves represent the basic design standard. They are manufactured in a wide range of sizes and pressure classes typically from forgings.

    Small Model (EC): The ball of trunnion mounted configuration is supported by external trunnions bolted to the body.  In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear.

  • API 6D Welded Body, Side Entry Trunnion Mounted Ball Valve

    Perar_Welded Body Trunnion Mounted Ball Valve ADDED
    READ MORE

    API 6D Trunnion Mounted Ball Valve

    Welded Body, Side Entry- Model WB

    The ball of trunnion mounted configuration is supported by bearing plates hold by the end adaptors. In such a way the pressure loads are transferred to the valve body granting a smooth rotation of the ball with low torque levels and reduced seat seal wear.

    On Perar Trunnion Mounted Welded Body Ball Valves the potential leak paths are minimized making them suitable for buried installations and in general for gas transportation.

    The weight and overall dimensions are optimized by applying a shaped design.

    They are manufactured in a wide range of sizes and pressure classes from forgings.

  • Cast Steel Globe & Y-Globe Valves with Bolted Bonnets

    Globe Valve ADDED
    READ MORE

    Cast Steel Globe Valve with Bolted Bonnet

    This Cast Steel Globe valve features a bolted bonnet with Class 150 to 1500 flanges in sizes 2 to 30”. This one piece body, top entry design allows for field service and inline maintenance. Valve bodies are manufactured in ASTM A216-WCB, A217-WC6 or A351-CF8M. Depending on service conditions, other material options are available for valve and trim.

    • Sizes: 2” – 30”
      • Larger sizes are available upon request
    • ANSI Class: 150 – 1500
    • Features: API 600, Testing to API 598, Bolted Bonnet/Pressure Seal Bonnet, Rising Stem, Standard/NACE
    • Body: Carbon, Alloy or Stainless Steel (WCB, LCC, WC6, C5, C12, and CF8M)
    • Trim: Trim 5, Trim 8 and Trim 16
    • End Connections: Raised Face (RF), Flat Face (FF)
      • Also available in RTJ and Butt Weld
    • Options: Y-Pattern

    *Additional sizes and materials available upon request. Availability is dependent on market demands

  • Bolted Bonnet Globe Valves with Flanged Ends, Style 0G81/0G83/0G86/G895

    Smith 0G81 ADDED
    READ MORE

    Bolted Bonnet Globe Valves with Flanged Ends

    Style 0G81/0G83/0G86/G895

    The Smith Bolted Bonnet Globe Valves feature an outside stem and yoke (OS&Y), and have conventional ports with flanged ends. The 0G81 is Class 150 rated, 0G83 is Class 300 rate, 0G86 is Class 600 rated and the G895 is Class 1500 rated. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Globe Valves with Threaded or Socket Weld Ends, Style 0G80/0G87

    Smith 0G80 ADDED
    READ MORE

    Class 800 Globe Valves with Threaded or Socketweld Ends

    Style 0G80/0G87

    The Smith 0G80 and 0G87 Gate Valves feature an outside stem and yoke (OS&Y), are Class 800 rated, and have conventional ports with either threaded or socket weld ends. The 0G80 has a bolted bonnet, where as the 0G87 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Y-Pattern Globe Valves with Welded Bonnet, Styles Y167/Y267

    Smith Y162 ADDED
    READ MORE

    Y-Pattern Globe Valves with Welded Bonnet

    Styles Y167/Y267

    The Smith Y167 and Y267 Y-Pattern Globe Valves feature a rotating outside stem and yoke (OS&Y), welded bonnet and full ports with either threaded or socket weld ends. The Y167 is Class 1690 rated and Y267 is Class 2690 rated. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Y-Pattern Bonnetless Globe Valves, Styles Y162/Y262/Y452

    Smith Y162 ADDED
    READ MORE

    Y-Pattern Bonnetless Globe Valves

    Styles Y162/Y262/Y452

    The Smith Y162, Y262 and Y452 Y-Pattern Globe Valves are bonnetless and feature a non-rotating outside stem and yoke (OS&Y), and full ports ports with either threaded, socket weld or butt weld ends. The Y162 is Class 1690 rated, Y262 is Class 2690 rated and Y452 is Class 4500 rated. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Pressure Seal Globe & Y-Globe Valves

    PK PS Globe Valve ADDED
    READ MORE

    Pressure Seal Globe Valve

    Pressure Seal Valves are intended for high pressure and high temperature applications for all types of fluids, except where severe coking may occur. Because of their design and materials of construction Pressure Seal Valves are an excellent choice for nuclear steam generating stations, industrial/chemical plants, and thermal power plants. Pressure Seal Valves offer efficiency in flow passage and sealing, weight saving, ease of installation and simplicity in maintenance.

    • Sizes: 2” – 18”
      • Other size available depending on ANSI Class
    • ANSI Class: 600 – 2500
    • Features: API 600/603, Testing to API 598, Pressure Seal Bonnet, Standard/NACE, Low Fugitive Emissions
    • Body: WCB, WC6, SC9, C5, C12, C12A, F591, CF8, CF8M, CF3, CF3M, CN7M, Duplex, Special Alloys
    • Trim: Trim 5, Trim 8, Trim 9, Trim 10, Trim 12 and Trim 16
    • End Connections: Raised Face
      • Also available in RTJ and Butt Weld

    *Additional sizes and materials available upon request. Availability is dependent on market demands

  • Cast Steel Gate Valve

    Flanged-Gate-Valve ADDED
    READ MORE

    Cast Steel Gate Valve

    • Sizes: 2” – 14”
      • Larger sizes are available upon request
    • ANSI 150 – 600
      • Other ANSI Classes are available upon request
    • Body: WCB
    • Trim: Trim 8
    • Features:
      • API 600
      • Testing to API 598
      • Bolted Bonnet
      • Outside Screw & Yoke
      • Raised-Face Flanged End Connections
  • Cast Steel Gate Valve with Bolted Bonnet

    Gate Valve ADDED
    READ MORE

    Cast Steel Gate Valve with Bolted Bonnet

    This Cast Steel Gate valve features a bolted bonnet with Class 150 to Class 1500 flanges in sizes 2 to 30”. The one piece flexible wedge with a tapered H shape is fully guided and suitable for steam and other high temperature service. The yoke sleeve is designed to allow for disassembly without disconnecting the bonnet and stem. Standard body materials are A216-WCB, A217-WC6 or A351-CF8. Depending on service conditions, other material options are available for valve and trim.

    • Sizes: 2” – 30”
      • Larger sizes are available upon request
    • ANSI Class: 150 – 1500
    • Features: API 600/603, Testing to API 598, Bolted Bonnet/Pressure Seal Bonnet, Outside Screw & Yoke, Flexible Wedge, Fully Guided Wedge, Rising Stem, Standard/NACE
    • Body: Carbon, Alloy or Stainless Steel (WCB, LCC, WC6, C5, C12, CF8 and CN7M)
    • Trim: Trim 5, Trim 8, Trim 16
    • End Connections: Raised Face (RF), Flat Face (FF)
      • Also available in RTJ and Butt Weld

    *Additional sizes and materials available upon request. Availability is dependent on market demands

  • Stainless Steel Gate Valve with Bolted Bonnet

    Gate Valve ADDED
    READ MORE

    Stainless Steel Gate Valve with Bolted Bonnet

    This Stainless Steel Gate valve features a bolted bonnet with Class 150 to Class 300 flanges in sizes 2 to 12”. The straight pattern, flanged ends comply with ANSI B16.5 (raised face, smooth finish) include an outside screw and yoke. The full bore stainless steel gate valve’s standard body materials are available in A351-CF8M or CF8. Depending on service conditions, other material options are available for valve and trim.

    • Sizes: 2” – 12”
      • Larger sizes are available upon request
    • ANSI Class: 150 – 1500
    • Features: API 600/603, Testing to API 598, Outside Screw & Yoke, Flexible Wedge, Fully Guided Wedge, Standard/NACE, Emissions Norm ISO 15848-B, Design to BS16.34
    • Body: Stainless Steel (CF8M, CF8, CF3, CF8C and CN7M)
    • Trim: Trim 10 or Trim 12
    • End Connections: Raised Face (RF)
      • Also available in RTJ and Butt Weld

    *Additional sizes and materials available upon request. Availability is dependent on market demands

  • Pressure Seal Gate Valve

    PK Pressure Seal ADDED
    READ MORE

    Pressure Seal Gate Valve

    Pressure Seal Valves are intended for high pressure and high temperature applications for all types of fluids, except where severe coking may occur. Because of their design and materials of construction Pressure Seal Valves are an excellent choice for nuclear steam generating stations, industrial/chemical plants, and thermal power plants. Pressure Seal Valves offer efficiency in flow passage and sealing, weight saving, ease of installation and simplicity in maintenance.

    • Sizes: 2” – 30”
      • Other size available depending on ANSI Class
    • ANSI Class: 600 – 4500
    • Features: API 600/603, Testing to API 598, Pressure Seal Bonnet, Outside Screw & Yoke, Flexible Wedge/Parallel Slide, Rising Stem, Standard/NACE, Low Fugitive Emissions
    • Body: WCB, WC6, SC9, C5, C12, C12A, F591, CF8, CF8M, CF3, CF3M, CN7M, Duplex, Special Alloys
    • Trim: Trim 5, Trim 8, Trim 9, Trim 10, Trim 12 and Trim 16
    • End Connections: Raised Face
      • Also available in RTJ and Butt Weld

    *Additional sizes and materials available upon request. Availability is dependent on market demands

  • Class 800 Gate Valves with Threaded or Socket Weld Ends, Style 0800/0870

    Smith 0800 ADDED
    READ MORE

    Class 800 Gate Valves with Threaded or Socket Weld Ends

    Style 0800/0870

    The Smith 0800 and 0870 Gate Valves feature an outside stem and yoke (OS&Y), are Class 800 rated, and have conventional ports with either threaded or socket weld ends. The 0800 has a bolted bonnet, where as the 0870 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 1500 Gate Valves with Threaded or Socket Weld Ends, Style 1500/1570

    Smith 1500 ADDED
    READ MORE

    Class 1500 Gate Valves with Threaded or Socket Weld Ends

    Style 1500/1570

    The Smith 1500 and 1570 Gate Valves feature an outside stem and yoke (OS&Y), are Class 1500 rated, and have conventional ports with either threaded or socket weld ends. The 1500 has a bolted bonnet, where as the 1570 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Bolted Bonnet Gate Valves with Extended Male End, Style 0811-0814

    Smith 0812 ADDED
    READ MORE

    Class 800 Bolted Bonnet Gate Valves with Extended Male End

    Style 0811 – 0814

    The Smith 0811 – 0814  Bolted Bonnet Gate Valves feature an outside stem and yoke (OS&Y), and have conventional ports with extended male (threaded or plain) x female (threaded or socketweld) ends. They are Class 800 rated. All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Bolted Bonnet Gate Valves with Flanged Ends, Style 0815/0830/0860

    Smith 0830 ADDED
    READ MORE

    Bolted Bonnet Gate Valves with Flanged Ends

    Style 0815/0830/0860

    The Smith 0815, 0830 and 0860 Bolted Bonnet Gate Valves feature an outside stem and yoke (OS&Y), and have conventional (reduced) ports with flanged ends. The 0815 is Class 150 rated, the 0830 is Class 300 rated and the 0860 is Class 600 rated.  All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Welded Bonnet Gate Valves with Extended Male End, Style 0876 – 0879

    Smith 0877 ADDED
    READ MORE

    Class 800 Welded Bonnet Gate Valves with Extended Male End

    Style 0876 – 0879

    The Smith 0876 – 0879 Welded Bonnet Gate Valves feature an outside stem and yoke (OS&Y), and have conventional ports with extended male (threaded or plain) x female (threaded or socketweld) ends. They are Class 800 rated. All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Gate Valves with Integrally Reinforced Extended Bodies, Style 0874/0875

    Smith 0875 ADDED
    READ MORE

    Class 800 Gate Valves with Integrally Reinforced Extended Bodies

    Style 0874/ 0875

    The Smith 0874 and 0875 Integrally Reinforced Extended Body Gate Valves feature an outside stem and yoke (OS&Y), and have conventional ports with female NPT x buttweld reinforced extended ends. They are both Class 800 rated. The 0874 has a bolted bonnet where as the 0874 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Bellow Seal Gate Valve with Threaded or Socket Weld Ends, Style B870

    Smith B870 ADDED
    READ MORE

    Class 800 Bellow Seal Gate Valve with Threaded or Socket Weld Ends

    Style B870

    The Smith B870 Bellow Seal Gate Valve features an outside stem and yoke (OS&Y), welded bonnet and conventional port with either threaded or socket weld ends. It is manufacturerd in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Cryogenic Gate Valves with Threaded or Socket Weld Ends, Styles C800/C870

    Smith C800 ADDED
    READ MORE

    Class 800 Cryogenic Gate Valves with Threaded or Socket Weld Ends

    Styles C800/ C870

    The Smith C800 and C870 Cryogenic Gate Valves feature an outside stem and yoke (OS&Y), are Class 800 rated with conventional ports and either threaded or socket weld ends. The C800 has a bolted bonnet, where as the C870 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Dual Expanding Plug Valve

    VE_Dual Expanding Plug Valve_800 ADDED
    READ MORE

    Dual Expanding Plug Valve

    The VE® Dual Expanding plug valve was developed to replace the practice of using two in-line valves with a drain and/or bleed valve. Traditional gate valves and other valve combinations degrade overtime and result in loss of product and require frequent maintenance. The special design of the dual expanding plug valve’s sealing mechanism minimizes wear, providing a long lasting and safe, zero leakage flow control solution.

    Available in several different bleed system configurations in conjunction with a pressure relief device, this all in one valve not only meets API 6D requirements, but also provides a space saving, reliable and economical solution.

  • Y-Pattern Spring Piston Check Valve, Styles YC16/YC26

    YC16 YC26 ADDED
    READ MORE

    Y-Pattern Spring Piston Check Valve with Threaded or Socket Weld Ends

    YC16/YC26

    The Smith YC16 & YC26 Y-Pattern Spring Piston Check valves feature a welded cap with threaded or socket weld ends.  All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Y-Pattern Globe Valve with Threaded/SWE, Styles YG80/YG87

    YG87angle ADDED
    READ MORE

    Class 800 Y-Pattern Globe Valves with Threaded or Socketweld Ends

    Styles YG80/YG87

    The Smith YG80 and YG87 are Class 800 Globe Valves with outside stem and yoke (OS&Y) with either threaded or socketweld ends. The YG80 is has a bolted bonnet and full port, while the YG87 has a welded bonnet and conventional port. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Cryogenic Globe Valves with Flanged Ends, Styles CG81/CG83/CG86

    CG83 ADDED
    READ MORE

    Cryogenic Globe Valves with Flanged Ends

    Styles CG81/CG83/CG86

    The Smith CG81, CG83, and CG86 Cryogenic Globe Valves feature a bolted bonnet with outside stem and yoke (OS&Y), conventional ports and flanged ends. The CG81 is Class 150 rated, the CG83 is Class 300 rated, and the CG86 is Class 600 rated. All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 2500 Globe Valves, Styles G250/G257

    Smith 0G80 ADDED
    READ MORE

    Class 2500 Globe Valves with Threaded or Socketweld Ends

    Style G250/G257

    The Smith G250 and G257 Gate Valves feature an outside stem and yoke (OS&Y), are Class 2500 rated, and have conventional ports with either threaded or socketweld ends. The G250 has a bolted bonnet, where as the G257 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 1500 Globe Valves, Styles G150/G157

    Smith 0G80 ADDED
    READ MORE

    Class 1500 Globe Valves with Threaded or Socketweld Ends

    Style G150/G157

    The Smith G150 and G157 Gate Valves feature an outside stem and yoke (OS&Y), are Class 1500 rated, and have conventional ports with either threaded or socketweld ends. The G150 has a bolted bonnet, where as the G157 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Globe Valves, Styles 0G80/0G87

    Smith 0G80 ADDED
    READ MORE

    Class 800 Globe Valves with Threaded or Socketweld Ends

    Style 0G80/0G87

    The Smith 0G80 and 0G87 Gate Valves feature an outside stem and yoke (OS&Y), are Class 800 rated, and have conventional ports with either threaded or socket weld ends. The 0G80 has a bolted bonnet, where as the 0G87 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Cryogenic Gate Valves with Flanged Ends, Styles C815/C830/C860

    C815-GATE=VALVE ADDED
    READ MORE

    Cryogenic Gate Valves with Flanged Ends

    Styles C815/C830/C860

    The Smith C815, C830, and C860 Cryogenic Gate Valves feature a bolted bonnet with outside stem and yoke (OS&Y), conventional ports and flanged ends. The C815 is Class 150 rated, the C830 is Class 300 rated, and the C860 is Class 600 rated. All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 1500 Extended Body Gate Valve with Buttweld Ends, Styles 0895B/1500B

    Smith-0800B_web ADDED
    READ MORE

    Class 1500 Extended Body OS&Y Bolted Bonnet Gate Valves with Buttweld Ends

    Style 0895B/1500B

    The Smith 0895B and 1500B Gate Valves feature an outside stem & yoke (OS&Y), bolted bonnet and extended body with buttweld ends. The 0895B is full port and the 1500B is conventional port. Both are Class 1500 rated and manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Extended Body Gate Valve with Buttweld Ends, Style 0800B

    Smith-0800B_web ADDED
    READ MORE

    Class 800 Extended Body OS&Y Bolted Bonnet Gate Valves with Buttweld Ends

    Style 0800B

    The Smith 0800B features an outside stem & yoke (OS&Y), bolted bonnet and extended body with buttweld ends. The 0800B is conventional port and Class 800 rated and is manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 1500 Full Port Gate Valve with Flanged Ends, Style 0895

    Smith-0895_web ADDED
    READ MORE

    Class 1500 OS&Y Bolted Bonnet Full Port Gate Valve with Flanged Ends

    Style 0895

    The Smith 0895 features an outside stem and yoke (OS&Y), bolted bonnet, is Class 1500 rated, and has full ports. It is manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 1500 Full Port Gate Valves, Style 1578/1588

    Smith 5870_web ADDED
    READ MORE

    Class 1500 Full Port Gate Valves with Threaded or Socket Weld Ends

    Style 1578/1588

    The Smith 1578 and 15880 Gate Valves feature an outside stem and yoke (OS&Y), are Class 1500 rated, and have full ports with either threaded or socket weld ends. The 1588 has a bolted bonnet, where as the 1587 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

    cations[/button]

  • Full Port Bolted Bonnet Gate Valve with Flanged Ends, Styles 5815/5830

    Smith 0815 ADDED
    READ MORE

    Full Port Bolted Bonnet Gate Valves with Flanged Ends

    Styles 5815/5830

    The Smith 5815 and 5830 Bolted Bonnet Gate Valves feature an outside stem and yoke (OS&Y), and have full ports with flanged ends. The 5815 is Class 150 rated and the 5830 is Class 300 rated. All are manufactured in accordance with API 602 and ASME B16.34 standards.

  • Class 800 Inside Screw Gate Valves, Styles 0850/0890

    Smith-0850_web ADDED
    READ MORE

    <img class=”alignnone wp-image-2470″ src=”/wp-content/uploads/smith.jpg” alt=”” width=”119″ height=”101″ />
    <h4><strong>Class 800 Conventional Port </strong><strong>Inside Screw </strong><strong>Gate Valves with Threaded or Socket Weld Ends</strong></h4>
    <h4>Style 0850/0890</h4>
    The Smith 0850 and 0890 Gate Valves feature an inside screw (IS), are Class 800 rated, and have conventional ports with either threaded or socket weld ends. The 0850 has a bolted bonnet, where as the 0890 has a welded bonnet. Both are manufactured in accordance with API 602 and ASME B16.34 standards.

  • FORCE® 1-Piece Reduced Bore Floating Ball Valve, BU Series

    BU-Series ADDED
    READ MORE

    FORCE LOGO 10-24-13

    FORCE ® 1-Piece Reduced Port Floating Ball Valve

    BU Series

    • Sizes: 2” – 10”, ANSI 150 – 300
    • Port: Reduced Port
    • Body: Carbon or Stainless Steel
    • Ball: 316 Stainless Steel
    • Features:
      • Unibody Design
      • Floating Ball
      • API 6D
      • API 607
      • NACE MR-0175 (2009)
      • Fire Safe Design
      • Flanged Ends
      • Lever or Gear Operated
      • Lockable
    • Valves can also be made to order, Metal Seated Design, Cryogenic Valves, 3-Way Valves, Exotic Alloys and more are available upon request.
  • FORCE® 2-Piece Floating Ball Valve, BF Series

    BF Series ADDED
    READ MORE

      FORCE LOGO 10-24-13

    FORCE® 2-Piece Full Bore Floating Ball Valve

    BF Series

    • Sizes: ½” – 8”; ANSI 150 – 2500
    • Port: Full and Reduced Port
    • Body: Carbon or Stainless Steel
    • Ball: 316 Stainless Steel
    • Features:
      • 2-piece Body Design
      • NACE MR-0175 (2009)
      • API 6D
      • API 607
      • Fire Safe Design
      • Flanged Ends
      • Lever or Gear Operated
      • Lockable, Floating Ball
    • Valves can be made to order, Metal Seated Designs, Cryogenic Valves, 3-Way Valves, Exotic Alloys and more are available upon request
  • FORCE® 2-Piece Trunnion Mounted Ball Valves, BTN Series

    BTN-Series-SS ADDED
    READ MORE

    FORCE LOGO 10-24-13

    FORCE® 2-PieceTrunnion Mounted Ball Valves

    BTN Series

    • Sizes: 2” – 48”, ANSI 150 – 2500
    • Port: Full and Reduced
    • Body: CF8M Stainless Steel, Carbon Steel
    • Ball: 316 Stainless Steel
    • Features:
      • Trunnion Mounted Ball
      • 2-piece Designs
      • Flanged Ends
      • NACE MR-0175 (2009)
      • API 6D
      • API 6FA
      • Fire Safe Design
      • Double Block and Bleed
      • Lever and Gear Operated
      • Lockable
    • Valves can be made to order – Metal Seated Designs, Cryogenic Valves, 3-Way Valves, Exotic Alloys and more are available upon request
  • 3-Piece Trunnion Mounted Ball Valves, BTN Series

    BTN-Series ADDED
    READ MORE

     FORCE LOGO 10-24-13

    FORCE® 3-Piece Trunnion Mounted Ball Valves

    BTN Series

    • Sizes: 2” – 48”; ANSI 150-2500
      • C&C Stocks up to 16” valves – larger sizes are made to order
    • Port: Full and Reduced Bore Available
    • Body: Carbon Steel
    • Ball: A216 WCB with ENP Coating
    • Features:
      • Trunnion Mounted Ball
      • 2-piece and 3-piece Body Designs
      • Flanged Ends
      • NACE MR-0175 (2009)
      • API 6D
      • API 6FA
      • Fire Safe Design
      • Double Block and Bleed
      • Lever and Gear Operated
      • Lockable
    • Valves can be made to order – Metal Seated Designs, Cryogenic Valves, 3-Way Valves, Exotic Alloys and more are available upon request
  • 1000# Stainless Steel Ball Valve, BVRS Series

    1000-Stainless-Steel-Ball-Valve ADDED
    READ MORE

     

    1000# Stainless Steel Ball Valve

    BVRS Series
    • Sizes: ¼” – 2”
    • Pressure: 1,000 PSI NSCWP
    • Port: Reduced Port
    • Body: CF8M
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
    • Features: 1-piece Body (Uni-body), NACE Compliant, Stainless Steel, Locking Handle, Floating Ball, Threaded FNPT Ends
  • 2-Piece 2000# Stainless Steel Ball Valve, BVSF Series

    BVSF-Series ADDED
    READ MORE

    2-Piece 2000# Stainless Steel Ball Valve

    BVSF Series

    • Sizes: ¼” – 4”
    • Pressure: ¼” – 2” rated at 2,000 PSI NSCWP § 2.5” – 4” rated at 1,000 PSI NSCWP
    • Port: Full Port
    • Features:Seal-Welded 2-piece Body, NACE Compliant, Stainless Steel Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: CF8M
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
  • 2-Piece 3000# Stainless Steel Ball Valve, Series BVSH

    3000-2-PC-SS-BALL-VALVE ADDED
    READ MORE

    2-Piece 3000# SS Ball Valve

    Series BVSH

    • Sizes: ¼” – 2”
    • Pressure: 3,000 PSI NSCWP
    • Port: Full Port
    • Features: 2-piece Seal Welded Body, NACE Compliant, Fire Safe Design, Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: Stainless Steel
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
  • 2-Piece 6000# Stainless Steel Ball Valve, Series BVSX

    6000-2-PC-SS-BALL-VALVE ADDED
    READ MORE

    2-Piece 6000# SS Ball Valve

    Series BVSX

    • Sizes: ¼” – 2″”
    • Pressure: 6,000 PSI NSCWP
    • Port: Full Port
      • 2″ – Reduced Port
    • Features: 2-Piece Seal Welded Body, Fire Safe Design, NACE Compliant, Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: Stainless Steel
    • Ball: CF8M
  • 3-Piece 1000# Stainless Steel Ball Valve, Series BVSL

    1000-3-PC-SS-BALL-VALVE ADDED
    READ MORE

    3-Piece 1000# SS Ball Valve

    Series BVSL

    • Sizes: ¼” – 4”
    • Pressure: 1,000 PSI NSCWP
    • Port: Full Port
    • Features: 3-piece Bolted Body, NACE Compliant, Fire Safe Design, Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: Stainless Steel
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
  • 3-Piece 2000# Stainless Steel Ball Valve, Series BVSC

    1000-3-PC-SS-BALL-VALVE ADDED
    READ MORE

    3-Piece 2000# SS Ball Valve

    Series BVSC

    • Sizes: ¼” – 2”
    • Pressure: 2,000 PSI NSCWP
    • Port: Full Port
    • Features: 3-piece Bolted Body, NACE Compliant, Fire Safe Design, Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: Stainless Steel
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
  • 2000# Barstock Ball Valve, Series BVSR

    BVSR Series ADDED
    READ MORE

     

    Barstock Ball Valve

    Series BVSR

    • Sizes: ¼” – 2”
    • Pressure: 2,000 PSI NSCWP
      • Water, Oil, Gas
    • Port: Reduced Port
    • Features: 1-piece Body Design, NACE Compliant, Threaded FNPT Ends in accordance with ASME B2.1 & BS21, Floating Ball
    • Body: WCB
    • Ball: 316 Stainless Steel
    • Stem: Blow-out Proof Design, 316 Stainless Steel
  • 2-Piece 2000# WCB Ball Valve, Series BVBU

    BVBU-Series-1 ADDED
    READ MORE

     

    2-Piece 2000# WCB Ball Valve

    Series BVBU

    • Sizes: ¼” – 4”
    • Pressure: 1/4″ – 2″ @ 2,000 PSI NSCWP
      • 2 1/2″ – 4″ @ 1,000 PSI NSCWP
    • Port: Full Port
    • Features: 2-piece Seal-Welded Body, NACE Compliant, Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: WCB
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
  • 2-Piece 3000# WCB Ball Valve, Series BVCH

    3000-2-PC-WCB-BALL-VALVE ADDED
    READ MORE

    2-Piece 3000# WCB Ball Valve

    Series BVCH

    • Sizes: ¼” – 2”
    • Pressure: 3,000 PSI NSCWP
    • Port: Full Port
    • Features: 2-piece Seal Welded Body, NACE Compliant, Fire Safe Design, Locking Handle, Floating Ball, Threaded FNPT Ends
    • Body: WCB
    • Ball: 316 Stainless Steel
    • Stem: 316 Stainless Steel, Blow-out Proof Design
123›»
  • Browse by Category
    • Valves
      • All Valves
      • Ball Valves
      • Butterfly Valves
      • Check Valves
      • Control Valves
      • Gate Valves
      • Globe Valves
      • Needle Valves
      • Plug Valves
      • Specialty Valves
      • Valve Kits & Parts
    • Actuators
      • All Actuators
      • Hydraulic Actuators
      • Pneumatic Actuators
      • Manual Gear Operators
    • Valve Automation Controls & Accessories
      • All Valve Automation
      • Automation Accessories
    • Flow Line & Oil Field Products
      • All Flow Line & Oil Field Products
      • Adapters & Crossovers
      • Bends/Ells
      • Couplings
      • Crosses & Tees
      • Gaskets & Seals
      • Hose Loops
      • Manifolds & Valves
      • Nipples
      • Plugs
      • Swages
      • Swivel, Expansion & Pup Joints
      • Unions
      • Valve Kits & Parts
  • Browse by Brand
    • C&C
    • Diamond Gear
    • Eckart
    • Econ
    • Force
    • Perar
    • Smith Valve
    • PK Valve
    • VE

For projects, new construction or MRO business, CNC Flow Control can do the job. Our technical expertise and passion for excellence is what keeps our customers coming back. It’s our people and know-how that make the difference!

If you do not have an account with us and are interested in becoming a customer please contact us today.

Product Literature

  • CNC Flow Control Line Card
  • Trident Forged Trunnion Ball Valve – DIB
  • Perar Trunnion Catalog
  • Diamond Gear Line Card
  • Smith Forged Catalog
  • Econ® Rack & Pinion Brochure
  • Grooved End Ball Valve

Commodity Price

CONTACT US

Edmonton – Distribution Center
Unit 3, 2930 – 51st Avenue NW
Edmonton, AB T6P 0E1

Toll-free: (866) 723-4279
Phone: (780) 462-9166
Fax: (780) 466-3451


CNC Canada Warehouse
Copyright © 2017 - All Rights Reserved | CNC Flow Control | Terms & Conditions of Sale | Terms & Conditions of Purchase